Installing eco power parts hot pipes need some help

[Exploring2013]

So I just received my hot pipes in the mail and I requested to have a tial bov installed with it. Has anyone else installed one of these and could you explain what parts you bought and how you routed the vacuum hose to the bov? As well as what you did with the stock ones?

 

[peterk9]

Yes, it has been installed before by at least one member.

ecoboost_xsport consolidated build/maintenance thread

Removal And Installation Of The Intake Manifold Original Post: How to: - Removal And Installation Of 2015 Sport Intake Manifold I ended up doing this for multiple reasons. Installation of XDI +30% fuel injectors, installation of the X35Designs phenolic spacer, installation of the BBK 70mm...

www.explorerforum.com

Peter

 

[ecoboost_xsport]

I just disconnected my stock ones completely. As for a vacuum source:

Transverse 3.5L EcoBoost Boost/Vacuum Source

I often get asked where a good place would be to tap into a boost/vacuum source. Typically it’s for a gauge, but sometimes other reasons such as an aftermarket blow-off valve (BOV). Well, even though there are more ways to skin this cat, I’d say this is probably the best (and possible easiest)...

www.fortheworkshop.com