JMan689/Bigman's Truggy Build

So far it's looking like its going to be:
- Shortened Bronco frame
- D44
- 9" w/mini spool
- 39.5" Boggers
- 93 Exploder body chopped, everything behind the drivers seat and everything in front.
- V8 (Looks like we'll be using a 400)
- C6 trans
- NP205

So far this is the plan. Bigman wants to have it done by the time badlands rolls around (i doubt it) but we'll see. This is basically going to just be a basic build for cheap. I believe we are starting this weekend so i will be taking lots of pics for you guys.

 

[Burns]

Sweet man. Kinda what i was going to do but on a shortned explorer frame... but i have no extra time now

 

[JMan689]

Sweet man. Kinda what i was going to do but on a shortned explorer frame... but i have no extra time now

Thats what we planned on using BUT he found a rolling Bronco frame, with all suspension, steering components, and a 400 for cheap. So we most likely use that.

Originally it was going to be a Explorer frame with a 302 and C4 but Bigman has 3 c6s laying around so we'll just get the 4wd output shaft and use one of those.