Lets see pics of your non-Xplorer project cars/trucks...

[VairKing]

I know a lot of you guys have other project cars other than the Xs, ive seen a Supra, a Camaro, a few Stangs, etc. Lets see some pics! Here is my current project, just picked it up Sunday, its a '65 Chevy Corvair with a mid mounted 350 Chevy...I am gonna do a pretty much ground up on it, including race suspension, 400HP smallblock, roll cage, etc. Hopefully it will run 11s or faster, it should, as it will wont weigh too much...here are a few pics

 

[VairKing]

2.

 

[VairKing]

3.

 

[Randall]

Dead Link Removed
plans are 4" lift, 33's, new (used) motor, cage, 8.8, d35, for starters.

 

[james t]

well, you've all seen it before, but i might as well ***** it out one more time...

 

[diablo5969]

I wish I had a project vehicle. Maybe someday...

 

[VairKing]

Well here is my other Corvair, its not really a project anymore as its pretty much completed (old cars are never "completed") This one is my nice weather daily driver

 

[Gina]

Here's ours. Yeah, she's ugly, but just give her a year or two. She's going to get a 350 too. '70 Opel GT by the way.

 

[DarkFox1]

1967-1972 chevy C10 pickup, I say the years cos theres about 1 peice or more of every year of the body style thats going on it

 

[clarkkent]

Originally posted by VairKing
I know a lot of you guys have other project cars other than the Xs, ive seen a Supra,

I'm the guy with the supra...

Hopefully By next March it'll be done.. Before i stripped it i ran 12.8 @118. I'll be running hopefully 10's, early 11's daily driven on street tires. I'm adding a T78 turbo, 150 shot nos, Tein Suspension and a mixture of Trial bodykits and JUN. When i'm done i'll be pushing close to 650 hp without NOS.. With Nos i'll hopefully be in the 800's club! haha Barely Street Legal

 

[DonM]

800 HP barely legal?

Ive seen Supras with over 1000 HP that was still street legal!

 

[SplashMan]

1986 F-250 4x4 351W... came with 8.5' Western plow

I only plan on keeping this for 2 years or so, it has a D50 front and full floater 10.25 rear with stock 4.10 gears. Plans for it so far are...
1. 33x12.5R16.5 TRXUS M/Ts
2. add-a-leafs front and rear
3. Rancho RS5000s on all corners
4. Replace bench seat with buckets out of full size Bronco
5. Warn man hubs
6. Limited slip for the rear
7. electric radiator fan
8. 100 amp alternator

I'm still researching the 351W and the different options to give it a little more umpf... I'm going to use it as a tow rig in the summer and a plow truck in the winter.

 

[Brian1]

Here is my on-going project
Specs:
1942 GPW Tub and Frame
3/4 ton axles both 5.13 and detroit locked
rear cutting brakes
4 wheel disc brakes
dana 300 twin stick t-case
hi-steer
will have hydro assist
38.5 swamper sx's
will have recentered hummer beadlocks
chevy 350 4 bolt main with edelbrock manifold, edelbrock cam, roller rockers, etc.
sm420 tranny w/7:1 1st gear
will have a 6 point cage

 

[KSpride]

A 81 Bronco

This is not my truck. It belongs to Darryl, a friend of Bigtig and myself. WE were tearing it up all day.

Beginning

After

The tailgate is off now also.

 

[99explorer5.0]

Here is my project car. I just bought it a few days ago for $150. Its a 1991 grand marquis. In August i will be driving in a figure 8 race and if the car still runs after that at the end of the night there is going to be a 100 car demolition derby. I am in the process of stripping it down.

 

[clarkkent]

Originally posted by DonM
800 HP barely legal?

Ive seen Supras with over 1000 HP that was still street legal!

haha yeh.. im still workin on passin 500 HP first....

 

[Robb]

This is my other vehicle project. I had almost forgotten about it. After taking this pic today, I threw the seat on it and took it for a little ride through the neighborhood. It has been about 8 months since I have even started it. It will be nice one day..................

 

[X~FACTOR]

This is a scary project...

Originally posted by VairKing
2.

Got an update on this project, VairKing?

 

[TarHeel085]

its a 1967 Jeep CJ5. original 134cu. engine, Dana 44 tapered rear, Dana 27 front, T90 tranny, Dana 18 t-case, 4" Superlift, 15x10 Pacers, 33x12.5 TSL's, and its got 1.25" spacers in the front, i need to get new pics as there has been a lot of body work done, and the interior has been herced, as well as it has fenders now too. http://www.webphotos.com/list_photos.asp?mi=3&smi=2&a=88566

 

[go off road]

.