datsunzcar84
New Member
- Joined
- February 17, 2009
- Messages
- 1
- Reaction score
- 0
- City, State
- Newville PA
- Year, Model & Trim Level
- 04Explorer,98mountaineer
I need some advice on what to do next...
I have a 04 Explorer XLT V8 4wd
Yesterday I replaced a Rear caliper after Noticing a cracked piston . I bled out the entire system several times , It does not appear to have any air. I also cracked the lines at the master . I bled in this order RR-LR-RF-LF It has been getting better which makes me believe that I didn't Fubar the Master.
Is there any other bleed points I am missing ?
The pedal is still spongy and i am not sure what to bleed next...
I have a 04 Explorer XLT V8 4wd
Yesterday I replaced a Rear caliper after Noticing a cracked piston . I bled out the entire system several times , It does not appear to have any air. I also cracked the lines at the master . I bled in this order RR-LR-RF-LF It has been getting better which makes me believe that I didn't Fubar the Master.
Is there any other bleed points I am missing ?
The pedal is still spongy and i am not sure what to bleed next...
