Europin83
New Member
- Joined
- April 21, 2015
- Messages
- 1
- Reaction score
- 0
- City, State
- Towson, MD
- Year, Model & Trim Level
- '02 Explorer XLT
Hello everyone,
This was priced out to be a costly State Inspection, so I have chosen to do both-rear-wheels --> lower control arm bushings myself. I have done the necessary objectives but am stuck at inserting the rented C clamp to push the whole bushing out. While pushing the old bushing I damaged it thus I believe there is a small piece still stuck in the control arm itself. I can be wrong by not be pressing hard 'C-Clamp' can someone help? Hopefully these pictures would be more help. Not a mechanic by far. Thx to all.
... Well apparently I'm 'not allowed to post pics' ! ?
This was priced out to be a costly State Inspection, so I have chosen to do both-rear-wheels --> lower control arm bushings myself. I have done the necessary objectives but am stuck at inserting the rented C clamp to push the whole bushing out. While pushing the old bushing I damaged it thus I believe there is a small piece still stuck in the control arm itself. I can be wrong by not be pressing hard 'C-Clamp' can someone help? Hopefully these pictures would be more help. Not a mechanic by far. Thx to all.
... Well apparently I'm 'not allowed to post pics' ! ?
