new member

[Frank Faraci]

Hello everyone. Just joined the forum for Explorers.I will have a few questions on the Explorer I'm resurrecting from the dead.

Any help,positive comments,and assistance would be greatly appreciated.Winter is now upon us on the East coast and I must get this vehicle on the road soon.

Hope everyone has a happy holiday!

Frank

 

[Sams01XplrSprt]

welcome frank

 

[BrooklynBay]

Welcome to this forum!

 

[Dopler174]

Welcome to Explorer Forum!

 

[Frank Faraci]

in need of assistance

I have a 93 Ford Explorer V-6. I have completed all brakes,including lines and master cylinder (yes I bench bled the Master Cylinder) I still cannot get a brake pedal. Is it the ABS value assembly that has to be beld? If so how is this function performed? Any help would be appreciated.

2nd puzzle. I put in a new soliniod. Can't seem to get the hook up correct. It is a three connector soliniod. One small wire and terminal for the ignition switch. Two other larger terminals. One for positive to starter and the other a ground? I start the vehicle by jumping the small wire from the starter soliniod to the terminal closest to the firewall (where the positive cable is attached) but if left on that terminal starter will always be engaged.I have another black wiring coming from the fuse box (under the hood) which terminal does this attach to? If anyone has a diagram I can download I may be able to use it to slove this problem.

Thanks for any and all your assistance.