LeathersR
Member
- Joined
- July 5, 2024
- Messages
- 11
- Reaction score
- 7
- City, State
- Smithfield, NC
- Year, Model & Trim Level
- 2015 PIU and 2020 ST
In my 2015 PIU I wanted to use the three 40amp curcuits available for auxilliary power at the base of the center stack. In the upfitters guide I found the part number for the pigtal harness needed 3U2Z-14S411-HEA. Pricing was a no go for me at over $60 most everywhere I looked. Then I stumbled upon an alternative part WPT-363. It seems this is a commonly used plug for heater/AC blowers in many makes/models.
I was able to find this in stock for under $20. It doesn't come with any heat shrink or butt connectors like the specified part, and all the wires are white, but none of that mattered to me. I snapped it in place and tested it successfully. The WPT-363 I received seems beefy, sturdy, with thick gauge wires. I used this to build out a custom wiring harness for my center console.
I was able to find this in stock for under $20. It doesn't come with any heat shrink or butt connectors like the specified part, and all the wires are white, but none of that mattered to me. I snapped it in place and tested it successfully. The WPT-363 I received seems beefy, sturdy, with thick gauge wires. I used this to build out a custom wiring harness for my center console.
