Possible good find. D35 lockers and parts..

[Positive Vibes]

Thanks John. I will check. 8.8 lockers are a hit and miss on here. I found a few on ebay but still not that cheap. All you j%%pers are snagin them!

 

[JPA1982]

hey GIJOHN, got onto that NAXJA site and registered, trying to post message, letting me know of any D35 ez lockers for sale, to let me know and i would post on this site, for some reason i can't post threads?? any answers,

i want one of these lockers as i know many others here do, any help thanks.

 

[GI-John]

I'm a member over at NAXJA, we usually don't have many probs with posting.

I'll check around.

PS XJ, TJ, YJ, ZJ all had D35 rears at one point. Just be sure to check out the year and model # just to be sure.

http://www.jeepsunlimited.com/forums/showthread.php?s=&threadid=520242

http://www.naxja.org/forum/showthread.php?p=192756#post192756

http://www.jeepsunlimited.com/forums/showthread.php?s=&threadid=520241

http://www.jeepsunlimited.com/forums/showthread.php?s=&threadid=520246

 

[dejello]

I'll keep my eyes open for an 8.8 locker for ya man

 

[JPA1982]

thanks for the help john, don't know why i can't post over on that site, u find one, let me know asap, thanks a lot.

 

[GI-John]

Here is one...
http://www.jeepsunlimited.com/forums/showthread.php?s=&threadid=520266

 

[JPA1982]

i'm on it.

 

[glfredrick]

I've got the entire carrier from a Jeep D 35 and it is identical to the one in my 92 Ex front axle. The Lock Rite should drop right in - and the price was incredible ($50) from a Jeeper moving up. At the very worst, I may have to make the non-c-clip mod (do a search at the Ranger Station for info) - which involves a spring either over the axle shaft (under the rubber boot) or inside the joint (needs welding of the end cap) to eliminate the clip. For a $50 locker, you bet I'm going to deal with the clip and run it.

 

[jrgaylor]

I dunit too

I put this locker in my 91 works great, I ground down the c-clip a tiny bit on both sides and filed the rough edges smooth.

 

[GI-John]

Here's an ARB for 300.00

http://64.4.53.250/cgi-bin/linkrd?_...&hm___action=http://www.kentuckykrawlers.org/