Rubber Bumper on my Tonneau cover

[blitjen]

Hopefully someone can help me, I lost the little rubber bumper on my factory tonneau cover, its the one that doesn't have a key cylinder in it and it fits on the passengers side. It must of came loose and blew off but the dealer want's a $100 for a new one, I would rather have a used one so it will match the other two that have sun fading, any advice anyone, HELP!!

Thanks in advance, Brent.

 

[Loren R]

There's a place called LKQ Pick Your Part in Anaheim that you could try. Even if they don't have an ST in stock, they usually have a computerized system of other pick and pull places that might have what you need.

 

[Trac Marks]

The part number is 7A2Z99286B27A and they should be $60 to $70.

I think they mis-quoted you part number 7A2Z99402A36A, which is about $100 on average and goes on the rear or the driver side front - the one that opens to access the lock tumbler. You'd think with the 2:3 ratio that THIS would be the cheaper one...