slisman
Well-Known Member
- Joined
- October 24, 2016
- Messages
- 110
- Reaction score
- 37
- Location
- Poland
- City, State
- Gdańsk
- Year, Model & Trim Level
- 2000 Explorer II
Hello,
I observed (very rare issue) that sometimes when pushing pedal to metal revs go high and it looks like neutral was chosen.
For couple of seconds it still looks like neutral (high revs after touching pedal) and then everything goes back to normal.
Transmission is in good conditions, EPC and valves etc. were changed, few years ago Sonnax HD kit was mounted, no other problems with shifting. Any ideas how to diagnose it? Maybe adjusting cable?
I didn't find similar situation here
I observed (very rare issue) that sometimes when pushing pedal to metal revs go high and it looks like neutral was chosen.
For couple of seconds it still looks like neutral (high revs after touching pedal) and then everything goes back to normal.
Transmission is in good conditions, EPC and valves etc. were changed, few years ago Sonnax HD kit was mounted, no other problems with shifting. Any ideas how to diagnose it? Maybe adjusting cable?
I didn't find similar situation here
