torsion twist

[96limitedX]

ok i went back and checked my mesurments. i only got about 1-1.5" of lift when i did the torsion twist. the drivers side is toatly cranked and its not that high. the pass side still has about a 1/2" that it can be cranked.

so i searched and dident really find out what exactly i need to do and how to do it. from what i understand i need to re-index the drivers bar. but i dont know what i need to do that. any pics would be great.

thanks for any help

EDIT also by looking at your guys pics i can see i def dident get the full 2" of lift..

 

[Robb]

longer bolts

edit: What did you do to the front to match that 4" of ARC lift you had in the back?

 

[96limitedX]

i attemped that but i cant find a bolt with the round head. could i just grind one round at the top?

EDIT the rear is only lifted to match the front about 2" i droped the front ARC sensors back to stock. and the rear is only lifted 2" to match it.

here is where it sets right now with what lift i got out of the TT and the moded ARC in the rear with 31" tires. its nothing like it was back a year ago. i threw those brackes i had made away. now only the rear uses the ARC for lift. the front is all T-bars.

 

[section525]

Yes, grind the tip round and use a little lube when you insert your bolt.

 

[96limitedX]

Yes, grind the tip round and use a little lube when you insert your bolt.

that should work ok? cool i will run to lowes after dinner. thanks

 

[section525]

Lowes won't have them. Go to Fastenal. 500 W 41st. Ave

 

[96limitedX]

wheres that? lol darn i geuss i will have to wait till after shcool tomarro....

 

[Con Seann3ry]

use a little lube when you insert your bolt.

good advice

 

[section525]

wheres that?

Alaska

 

[96limitedX]

lol ok let me ask my dad..

thanks section!