tugboat94
New Member
- Joined
- January 17, 2009
- Messages
- 6
- Reaction score
- 0
- City, State
- Warwick, RI
- Year, Model & Trim Level
- 1994 Ranger
My Ranger is idling at 1300 rpm. I have used a scan tool and it came back with TPS out of range, I replaced it. I have checked the IAC with a VOM and it and it's supply voltage are within spec. I tested the ECT and it and it's supply voltage are within spec. I was thinking maybe somebody out there might have had a similar situation. Any help at this point would be much appreciated