13interceptor
Elite Explorer
- Joined
- May 14, 2017
- Messages
- 82
- Reaction score
- 1
- City, State
- Huntington ny
- Year, Model & Trim Level
- 2013 interceptor utility
How do i add photo of alignment sheet
Dead Link Removed Or find a 3rd party hosting site to link to (not photobucket).How do i add photo of alignment sheet
As I've mentioned, and if you would focus on the actions I mention, you might find resolution. In addition, there are a lot of parts in the front and rear suspension, over and above what you replaced. If you want to make progress, review what I wrote above. I've given you simple things to check. More messages is not going to get you any closer to a fix unless you go get your hands dirty.
An alignment if set correctly shouldn't change drastically under panic stops. If you have a suspension component moving due to a bad bushing, it could cause a pull. Uneven brake pressures will do it too. Again, the ball is in your court.
As I've mentioned, and if you would focus on the actions I mention, you might find resolution. In addition, there are a lot of parts in the front and rear suspension, over and above what you replaced. If you want to make progress, review what I wrote above. I've given you simple things to check. More messages is not going to get you any closer to a fix unless you go get your hands dirty.
An alignment if set correctly shouldn't change drastically under panic stops. If you have a suspension component moving due to a bad bushing, it could cause a pull. Uneven brake pressures will do it too. Again, the ball is in your court.
Right front castor shows in RED 2.3. Not sure what that means ????? I will post full alignment sheet when I figure this out
Anything in red is not good. Indicates it is out of alignment.Right front castor shows in RED 2.3. Not sure what that means ????? I will post full alignment sheet when I figure this out
On my printout there is no mention of "castor" only 'Camber'. Camber and Toe adjustments is what an alignment is all about. I think you should take it to the dealer or another alignment shop and have this checked/addressed before going any further. We seem to be going in circles here.Can caster be adjusted at all ? Can this indicate a bent frame ?
As I've mentioned, and if you would focus on the actions I mention, you might find resolution. In addition, there are a lot of parts in the front and rear suspension, over and above what you replaced. If you want to make progress, review what I wrote above. I've given you simple things to check. More messages is not going to get you any closer to a fix unless you go get your hands dirty.
An alignment if set correctly shouldn't change drastically under panic stops. If you have a suspension component moving due to a bad bushing, it could cause a pull. Uneven brake pressures will do it too. Again, the ball is in your court.
Thank you for taking out the Elite membership.It actually is driving Better since this last alignment. I’m trying to post the entire sheet from alignment. I have to upgrade my account . Will post shortly. I appreciate all the help