I can't match the stereo wiring colors? Help please? | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

I can't match the stereo wiring colors? Help please?

exploration1997

Well-Known Member
Joined
August 23, 2012
Messages
139
Reaction score
0
City, State
Manchester, NH
Year, Model & Trim Level
1997 Ford Explorer XLT
Hi! I found a diagram, this one to be exact:

L.F.+ IN DOOR = ORANGE w/ LIGHT GREEN...AT DASH = LIGHT GREEN
L.F. - IN DOOR = LIGHT BLUE w/ WHITE ...AT DASH = WHITE w/ ORANGE
R.F.+ IN DOOR = WHITE w/ LIGHT GREEN ...AT DASH = WHITE w/ RED
R.F. - IN DOOR = DARK GREEN w/ ORANGE ...AT DASH = BROWN
L.R. + IN DOOR = TAN w/ YELLOW...AT DASH = LIGHT BLUE w/ BLACK
L.R. - IN DOOR = GREY w/ LIGHT BLUE...AT DASH = YELLOW
R.R. + IN DOOR = BROWN w PINK...AT DASH = PURPLE w/ WHITE
R. R. - IN DOOR = ORANGE w/ RED STRIPE...AT DASH = LIGHT BLUE

If the "IN DOOR" Color Code Does NOT Match-Up: A Alternate "IN DOOR" Color Code
will be: LF+ LIGHT GREEN
LF - WHITE w/ ORANGE
RF + WHITE w/ RED
RF - BROWN
LR + LIGHT BLUE w/ BLACK
LR - YELLOW
RR + PURPLE w/ WHITE
RR - LIGHT BLUE
***SAME AS DASH....
There you go...With this info its fooolproof GOOD LUCK

And I managed to get the right rear, right front, and left front speakers to work, but my left rear speaker won't work. All of these other wires matched up and were the right color, so three of the speakers work. I took out my left rear speaker and attached the wires from my new head unit and the speaker (left rear) worked just fine. So there is some disconnect when I plug the yellow and light blue w/ black. And help? Thanks!
 






Back
Top