nickrahn
Member
- Joined
- November 3, 2009
- Messages
- 35
- Reaction score
- 0
- City, State
- Loganville, Wi
- Year, Model & Trim Level
- 92 Eddie Bauer 4x4
Hey guys,
I got me another shift motor and was wondering how do I replace my old one with it. I can figure it out but I would like a walk through so I make sure I don't miss anything.
lately I have my 4wd locked in at all times cause wisconsin weather is unpredictable. I have been noticing that when I turn the wheel the frnt left clunks and when I turn it sharper it seems to bind. I turned the wheel and tried to see what ws going on but I couldn't see anything broken. is this common? or is this something to worry about?
I have been having a problem with the truck running cold lately and today I changed the thermostat and it helped a little but still runs cold. I think I have a slight coolant leak somewhere, I have to add about 1-2 gal every couple weeks. If the coolant level is the slightest bit low will it affect the operation temp? I know some vehicles are more picky about fluid levels than others.
I was also wondering if there are any write-ups on repairing the parking brake and what kind of parts I will need. I can't seem to push the pedal at all, its stuck. didn't know if something is broke or what but I can't use it and with a stick shift it's kinda annoying not having a parking brake.
Lastly, is there a way to adjust the clutch switch. When I got the truck a couple months ago I didn't have to push the clutch in very far to start the truck now I gotta push it to floor pretty hard for the switch to engage so I can start the truck.
Thanks for the help. God Bless
I got me another shift motor and was wondering how do I replace my old one with it. I can figure it out but I would like a walk through so I make sure I don't miss anything.
lately I have my 4wd locked in at all times cause wisconsin weather is unpredictable. I have been noticing that when I turn the wheel the frnt left clunks and when I turn it sharper it seems to bind. I turned the wheel and tried to see what ws going on but I couldn't see anything broken. is this common? or is this something to worry about?
I have been having a problem with the truck running cold lately and today I changed the thermostat and it helped a little but still runs cold. I think I have a slight coolant leak somewhere, I have to add about 1-2 gal every couple weeks. If the coolant level is the slightest bit low will it affect the operation temp? I know some vehicles are more picky about fluid levels than others.
I was also wondering if there are any write-ups on repairing the parking brake and what kind of parts I will need. I can't seem to push the pedal at all, its stuck. didn't know if something is broke or what but I can't use it and with a stick shift it's kinda annoying not having a parking brake.
Lastly, is there a way to adjust the clutch switch. When I got the truck a couple months ago I didn't have to push the clutch in very far to start the truck now I gotta push it to floor pretty hard for the switch to engage so I can start the truck.
Thanks for the help. God Bless