Well as most of you know by now my old explorer that you used to see in my avatar and that i made quite a few videos of and put ALOOOOT of money into has been totalled out due to a bad car accident. Well it just so happens that i was able to acquire an 03 V-8 4.6 liter black explorer for a a decent price a shade under the price of a HOUSE!!! lol. Well anyways. Just to let some of you know my old stuff that was almost completely installed in the old 5.0 X is not going to go into the new 4.6 liter X. Instead that is going into a 5.0 mustang project later on in a while. As for my plans for the explorer,.........Well they are serious and very drastic. They will be not be abel to be started till about one or twoyears from now but when i do it will be a pretty fast progression when i can start it. The project mainly consists of one of two plans that i have thought of but still undecided. One is to keep my stock Romeo 4.6 aluminum block and drop in low compression forged internals and top it off with DOHC Cobra heads that have had some adjusting. And then of course top it off with a Kenne Bell Twin screw supercharger at about 17 or 18 psi of boost. The other plan is to somehow come across an 03 cobra lower engine assembly minus the roots charger and then tweak that engine a little and then install a Kene Bell blowzilla charger just like the first plan and crank it to 17 or so psi. And then there comes the possibility of me just getting full aftermarket 4 valve heads instead of messing with the Cobra heads. Alot of you are probably saying. MAN THAT IS ALOT OF MONEY!!! Yeah it is. But i have plans for that. Along with that of course comes the other stuff when you plan on making that much horsepower. first would be to send my tranny off to Lentech or another reputable tranny builder. Or maybe just order another whole built tranny completely separate from the stock one. I will have to work those details out later. Then of course comes the custom driveline components, and the built rear end. Yeah it is IRS. But i can deal with it. I know this will take alot of time and even more money but i am really serious about it, especially being that i was days away from completing my 5.0 explorer supercharger project when i wrecked that truck. So i feel like it is a personal challenge now. There are alot of details i left out that might want to be mentioned but that is it for now. I just wanted to give you all the heads up that i will be competing for the fastest 4th gen explorer here in a few years. Sounds like a long time and it is but i will stick to it. You all just have to be patient. MY lst charger project took about a full year if anyone was following that one since the beginning. And it was sooooooo close to being done. Well anyways just hit me up if you want to know anything about what i got planned or any other questions.