Key Fob

[College Student]

Success, the key turns the car over and will lock it with the fob buttons, for the $2 tip at Kramer and free key cutting it was totally worth the time and investment, lets hope it lat for the life of the car... well at a total of less than $65 cheaper then when we had ford make us some spares at $80

 

[therover1991]

Success, the key turns the car over and will lock it with the fob buttons, for the $2 tip at Kramer and free key cutting it was totally worth the time and investment, lets hope it lat for the life of the car... well at a total of less than $65 cheaper then when we had ford make us some spares at $80

Good to hear, enjoy it!

Looking forward to getting mine.

 

[College Student]

which kind did you invest in, and mine had a little trouble the key was too big even after taking it apart, they had to put it in the cutter backwards, well it works yay

 

[therover1991]

which kind did you invest in, and mine had a little trouble the key was too big even after taking it apart, they had to put it in the cutter backwards, well it works yay

hey if it works, it works right?

I got the fusion key, it should be coming in the mail today.

 

[College Student]

yes, all clears and everything is ok, to get it to work yo u will need to :

program the fob part (lock, unlock, hatch, alarm) by:
1) turn ignition from OFF to ON 8 times finishing on ON (within 10 seconds)
2) to tell you this worked the car will cycle by unlocking and locking
3) press one of the buttons on an origional fob
4) again the car will cycle
5) press a button on the new fob
6) (i think) it will again cycle
7) turn car to OFF and pull keys out of ignition
8) (with keys in hand) exit car and try the new fob

then cut the key

and then program the key (two origionals needed) by:
1) placing one of the origional keys in the ignition and turn to ON
2) wait for security light to stop being solid
3) pull out key
4) place second origional key in the ignition and turn to ON
5) wait for security light to stop being solid
6) pull out key
7) place new key in ignition and turn to ON
8) wait for security light to stop being solid
9) pull out key
10) put new key in and try to start your X

next step: tell us all it works, and if it doesn't then come back to the forums

 

[therover1991]

yes, all clears and everything is ok, to get it to work yo u will need to :

program the fob part (lock, unlock, hatch, alarm) by:
1) turn ignition from OFF to ON 8 times finishing on ON (within 10 seconds)
2) to tell you this worked the car will cycle by unlocking and locking
3) press one of the buttons on an origional fob
4) again the car will cycle
5) press a button on the new fob
6) (i think) it will again cycle
7) turn car to OFF and pull keys out of ignition
8) (with keys in hand) exit car and try the new fob

then cut the key

and then program the key (two origionals needed) by:
1) placing one of the origional keys in the ignition and turn to ON
2) wait for security light to stop being solid
3) pull out key
4) place second origional key in the ignition and turn to ON
5) wait for security light to stop being solid
6) pull out key
7) place new key in ignition and turn to ON
8) wait for security light to stop being solid
9) pull out key
10) put new key in and try to start your X

next step: tell us all it works, and if it doesn't then come back to the forums

thanks for that, now I dont need to go digging through the manual

my mail usually comes around 12 so within the next hour i am hoping to get it.

 

[College Student]

thanks for that, now I dont need to go digging through the manual

my mail usually comes around 12 so within the next hour i am hoping to get it.

Yeah i figured that would make it much easier for you, i'm always willing to help another person out, and i cant wait to hear the good news

 

[caveman302]

if that doesn't work i have the programming sequences written down. i do think it is a little different.

 

[BigRondo]

College Student, thanks for the updates on the new keys. This now has me excited!

therover1991, I hope you can get the fusion key working.

From my owner's manual. If you don't have an owner's manual, Dead Link Removed:

Dead Link Removed

 

[College Student]

thanks rondo

 

[BigRondo]

thanks rondo

No problem.

 

[therover1991]

No problem.

Rondo always saving the day. Now I dont need to go to my car and look through the manual because its such a long walk to my yard lol.

I really want my key, wheres the mail man?!

 

[BigRondo]

Rondo always saving the day. Now I dont need to go to my car and look through the manual because its such a long walk to my yard lol.

I really want my key, wheres the mail man?!

It's a lot easier this way. :

 

[therover1991]

Got the key today, programmed remote

Hopefully I have time to get the key cut tomorrow.

Ok slight problem, now my factory remotes arent working, but the keys still work. Any advice?

 

[College Student]

i read somewhere that there is a max of four fobs to a car but i may be wrong and if that is true then there must be a way of removing unwanted fobs

 

[therover1991]

i read somewhere that there is a max of four fobs to a car but i may be wrong and if that is true then there must be a way of removing unwanted fobs

That's correct thast you can only have 4 fobs but the new one I got would have only been my 3rd. So idk why the original 2 stopped working.

 

[College Student]

maybe simotanious (i know i cant spell) dead batteries

 

[therover1991]

maybe simotanious (i know i cant spell) dead batteries

Simultaneous - for future reference

I'm gonna check out the batteries tomorrow bc I have night class tonight.

I'm hoping that's it bc this is rather annoying.

 

[BabyNapes]

Programming Remote Key Fobs

When you program a new remote key fob, you have to re-program the original fobs at the same time. Following the steps in the manual, enter the programming mode. Once in programming mode, push a button on each remote, one at a time. For each remote, the locks will cycle to let you know it has successfully programmed. After you finish, exit programming mode.

I have programmed several extra factory remote key fobs for my Ford Focus and Mercury Mountaineer. For both, when you program one remote, you have to program them all at the same time, even if they previously worked for the vehicle.

Hope this helps. Good luck.

 

[College Student]

When you program a new remote key fob, you have to re-program the original fobs at the same time. Following the steps in the manual, enter the programming mode. Once in programming mode, push a button on each remote, one at a time. For each remote, the locks will cycle to let you know it has successfully programmed. After you finish, exit programming mode.

I have programmed several extra factory remote key fobs for my Ford Focus and Mercury Mountaineer. For both, when you program one remote, you have to program them all at the same time, even if they previously worked for the vehicle.

Hope this helps. Good luck.

Wow, not cool that means my old remote no longer works

Simultaneous - for future reference

thank you, but its spring break, so i don't need to look things up before typing them