Search results

Found issue.......well after everyone trying to help on here with advice and info over my head on trannys,i found the problem with my od light flashing and showing soliniod b malfunction code.As i expected after changing fluids and not finding any kinda debris and installing a new soliniod block...

thanks imp,im going with your suspicions about an issue with wiring somewhere and will be dropping it off at a local shop to check that for me today.the thread i started got alittle off track from what i am experiencing,other than shifting alittle hard from 1st to 2nd gear(all other shifts...

sorry i didnt mean to sound ungreatfull or appreciative of your knowledge.you obviously know more than me about the internals of transmissions.just really seems electrical not mechanical to me.guess ill stop wasting peoples time and take it to aamco

nice video but i aint doing all that,pretty sure i dont need to go that deep if at all,thanks for the advice though.

i still feel like its some kinda bad wiring or short somewhere that feeds the b solinoid as the soliniod block is new and not the problem.

the solinoid block is brand new one not rebuilt,didnt solve code for malfunction of b solinoid

i dont have it drop out of overdrive,just runs rpm to 2500 to 3000 rpms to shift from 1st to 2nd gear.all other shifts smooth as silk and zero hesitation when you put foot into it.

the code is 775,solinoid b malfunction not a pressure issues as the servo bores being worn would throw and be relative to pressure problem.this appears to be a electrical problem causing lack of juice to b solinoid or intermittent juice supply.it shifts way to good in other gears but going from...

thanks for chiming in and letn me what tranny i have.thats what it seems like there is a wire screwed up somewhere.when i replaced the solinoid block with a new one,i took the 8 hex head bolts out,backed the bolt on the outside bulkhead wireing conection all the way off,and wiggled the block and...

anyone know how to figure out wich transmission i have in my explorer by vin #?

could it be a wire grounded or shorted somewhere im missing?dont have 1500 for a new tranny right now,please help.i dont trust rebuilt trannys either.

so i couldnt find any problems with over drive switch wiring so i put it back together.i rechecked codes and its still bringing in Code of P0775 Pres. Ctrl Solenoid B Circuit Malfunction.,even after changing fluid and filter,and replacing the shift control module solinoid block with a new one...

thanks but i got no clue about the internals of trannys.i just pulled the shift lever to check the od switch wiring.the wires are cracked by where the plug end is but not severed.is there a way to test the button in the end of shifter for od?i put a meter in each wire end of plug and showed...

any solutions guys?its due for sticker and i need these lights to go away.

2002 explorer xlt,175 k miles on the 4.0 motor,auto etc.was spiting code for solinoid b and overdrive off flashing,check engine light on.dropped tranny pan,zero signs of metal or obvious wear,fluid looked alittle less red but didnt smell burt,replaced filter,fluids,replaced solinoid control...