Search results

Hey Thanks for the suggestion. I just have to wait till the weather warms up being that I have to remove the bottom dash panel under the steering column. I removed it once before to change the relay for the blinkers to stop the "Hyper Blinking" after installing the LED's so I know it will take a...

I have a 05 Eddie Bauer Explorer with the Heated Mirrors and for the past few weeks when I push the button to turn on the Rear Defrost it "Lights Up" momentarily, to indicate it is activated, then immediately turns off. I am aware the Power Mirrors run on the same circuit and they don't seem to...

Next this you can do to free up some HP, if you haven't done it already, is an electric fan swap. The truck runs alot looserwith the electric one.

Great Job! I'm glad it worked out for you. Thanx for the update.

Good Luck man and keep us posted. I'm am sure others here have been wondering if this mod can be done and how difficult it would be.

Info sent to email

Hey, you would have to check if it would fit but I have the C&L Plenum and a 75mm BBK throttle body off my 2000 4.6 Mustang GT asking $150 shipped to U.S. or even better picked up. BTW There is absolutely nothing wrong with either of them.

BTW I ran a new power cord for the amp from the battery. More Bass will need an upgrade in power cord and ground wires.

I replaced the factory subwoofer with a Pioneer subwoofer and also upgraded from the factory subwoofer amp to a pioneer subwoofer amp and installed it under the middle seat of the middle row of seats. Never had a problem.

Mine are Ventus AS

Hey JarvisB just wondering how does the truck feel in the highway at 80mph or above? Any vibration or shaking? I'm asking because I put brand new 20" rims with 275/45/20 Hankook Tires and when I get to 80mph I get a slight vibration in the front.

I'm pretty sure you might have to flash the PCM with the tire size so your speedo can read correctly. Looks Good BTW!

I agree, tune!

Hey Dennis thanks for posting the exact parts you used that for me was the hardest part. Now that I know what to get exactly I will Be doing this in the spring. I will just try to get white LED's since all my lights have been converted to white. I shouldn't have a problem the instructions are...

Wow it sucks that the new fan arrived defective. Did you just get the fan or the complete fan and shroud? I purchased mine on Craigslist for $50 and it was an OEM takeoff with the shroud. Everything fit perfect with the Mustang GT shroud. I didn't have to adapt anything.

Just an update on my install. It's been about 3-4wks since I made the conversion to electric fan and everything is going great! I especially love how much quicker the truck heats up when it's cold...much quicker than stock.

I have an 05 and live in Brooklyn and was wondering if when the weather gets warmer you would do me? Well I mean my truck. If so, how much would you charge me?

Anytime you replace OEM parts with aftermarket ones there is always a chance things might Not fit exactly as intended. With so many different companies making HID kits/bulbs the chances are rather great to have some slight fitment issues. First, since you stated it is only driver's side I...

Today I installed a custom tune into my 05 4.6 Eddie Bauer Explorer and all I could say is D A M N....I LOVE IT! The difference is nite & day. I ordered the tune from MorePowerTuning.com it's the first time I ever used them. The price was $75 for a 93 octane power tune. I was running the stock...

Good Luck with your install!

Compressor Works/Electric Fan Thermostat Part Number: 733652 Price: $24.99

I got rid of the entire original shroud. I had to trim off 4 tabs the Mustang shroud had on each corner. In order to keep it mounted I used 3 black zip ties in the top,(if you look closely you could see them), and 3 on the bottom. The shroud doesn't budge, nice and tight. It sit about 1/2" away...

I started covering the wires with black electrical tape but ran out of tape. I went and bought another roll but it is too cold to wrap them up the tape isn't sticking. As soon as it gets warmer I will finis covering the wires.

Ok hee are some pics. I have to put black tape aound the rest of the wires to "clean it up" but it is too cold and the tape is not as sticky.

I won't be able to post pics for a few day the wife is using the truck and doesn't get home till after dark. but as as I can I will take a few pics and post them.

The 2011 Mustang GT electric fan I used actually had 3 wires 1 was ground and the other 2 were low and high settings, it is a 2 speed fan. I just used the high setting. Also, I was able to use the complete shroud from the 2011 and everything. All I did was cut off 1 tab on each corner of the...

Ok, now I understand Thank you for enlightening me. :thumbsup:

It seems upsurd to me that the 4.6 modular mustangs have almost limitless chioces of superchargers to install and the 4.6 modular explorers have none. Am I the only one wondering? :scratch:

BTW please Don't think I am arguing with you I am just stating my experience and I appreciate yours and everyones feedback as I am No mechanic and have No qualifications as such just a DIYer. Thanks!

I don't know exactly what you mean about that. While installing the fan the thermostatic switch was Not seated against the radiator and as the temperature climbed so did the guage. It did Not overheat but it was climbing pass the halfway point towards 3/4 of the hottest point on the guage. I...

Let me be the first to welcome you aboard even though I just registered myself and have yet to post my own newbie thread, LOL!

BTW the kit I bought in Autozone was good for up to 2 fans.

Sounds good. The a/c trigger wire is the one I would have used for a manual overide switch. I wired it to the a/c as per the instructuions. I took the truck out today for the first time since the install and I must say it worked flawlessly. The temperature gauge stayed staedy just under the...

I just installed it yesterday so as far as it cooling better or worst it's yet to be seen. I expect it would be better. Yes you could definitely put a manual overide switch. Also the kit I used turns the fan on when the a/c is truned on.

I just installed today an electric fan from a 2011 Mustang GT on my 05 4.6 Explorer. Didn't use any controller for the fan just purchased an electric fan switch kit from Autozone for $24.99 which had a thermostat probe switch which was preprogrammed to turn the fan on at 185 degrees and turn the...