Search results

:chug:(UPDATE: On a 2002 4.0L SOHC EXPLORER) What's up Ford Fans!! Well I finally found out what was causing my idling issues on my 2002 4.0 SOHC Explorer Eddie Bauer edition. The poor Idling issues were indeed the result of a bad MAF sensor. I went ahead and replaced it with a factory MAF...

Thanks Elliott Hopson. I really appreciate your feedback. I agree, that is a good starting point. I'm going too try that next, Have a good day my friend. I'll post what I run into. DJ

Hello fellow members, It's great to be back!! I have a 2002 FORD Explorer 09/01 build date in decent shape with the popular, 4.0L SOHC V6... I'm hoping maybe someone might have some answers and :feedback: relating to this very annoying idling Issue that had recently just started.. HISTORY; 1...

Hello All Explorer Fans! This Explorerforum is definitely the best site with every Explorer generation in mind. Thanks SeriousExplorations!

Hello Explorer owners. I Had the same loud humming noises, spoken of on this topic. As for my 2002 Explorer, I had a lesson learned experience. Here's a suggestion for Explorer owners whose pinpointed the correct side of the noise, Which can be tricky to pinpoint alone... When ready to Replace...

Hello Everyone, I have a '02 explorer :navajo: which is one of the earlier, even earliest perhaps Gen.3 model due to its Build Sticker on the door, it reads 08/01.. I asked My wife, she is a title clerk, and said what I always thought, any model after the June month as example, model door...

A dremel attachment Yeah, DREMEL Came out with this New "EZ-Lock" Mandrel. I saw it at a Hardware store. This Allowed for a screw-less center of 240 grit sandpaper. The Sanding discs are about The size In Diameter, of the inlet hole. Next time you're in a hardware store, Check them out. 240...

I forgot to add that, I put a second coat of JB Weld on, after sanding the first with 240 grit sandpaper using a DREMEL. I think I have a better picture but, this is how I fixed my aluminum surface...

Lower T-stat Housing/Aluminum Mating Surface FIX. '02 4.0L Thanks for the reply 2000StreetRod. When I had her apart, JB Weld was the only thing I could think of using. And these days I found out that, JB Weld has quite a few choices on the market. I didn't want to go with the JB Welds...

Another Angle the of Aluminum mating surface before a fix Here is another angle of The Pitting. It's hard to believe that 50/50% Coolant/Distilled water Can wreck havoc To this extent...

Check out Dorman listed below; Water Pump Stud Assort. Size 5/16"-24, M8-1.25, M6-1.0

Thanks Tony....

Thanks Thanks Rick... :salute:

Hello to all Veteran and NEWBIES like myself, a Serious Ford Enthusiast, and Ford Explorer Owner of The third Generation SUV... My name is DJ. And I am thrilled, To be part of such a Incredible, knowledge based Forum That truly delivers, Not only answers, But respectful And a well-...

Early May 2014, I walked up on my '02 Explorer backed into a Freshly Paved Asphalt Parking Spot. As I walk up & get closer to my Ride a Smile :D Turns to :( When I saw not only the normal A/C puddle, but a second puddle 12" in front of the normal A/C Puddle and with the unmistakable smell of...

IF EVERYTHING WAS NOT MADE TO BREAK, THERE WOULD BE NO FORUMS... WITHOUT THIS FORUM, I WOULD STILL BE SEARCHING, FOR MY '2002 EXPLORER'S FACTORY HEAD UNIT OR RADIO "REAR SETS" OF SPEAKER WIRE COLORS. (+) / (-) .... THIS FORUM SAVED HOURS OF TIME & LABOR AND SAVED A BIT OF $$$... :D...

Welcome Explorer & Ford Enthusiast To My Visitors Page... Hope I can Answer Questions, Some May Have....

Hello to all the Veteran & New Members like myself :salute:.. My name is DJ.. From Deerfield Beach, Fl. Nice to meet All Of You's !!! I was searching for a Explanation of a wiring Schematic, And/or diagram, and I was amazed of the wealth of Information, I found On this particular forum...