Search results

Thank you @94Eddie for the link, while watching that video on the weak compressor, I saw the next video which was to do with the Thermostatic Expansion (TXV) valve. I had already replaced the compressor so didn't want to replace that again. After watching that video on the TXV I decided to...

Yes on the driver side

The issue I am having is that the Driver side air is not as cold as the passenger side, I replaced the Drive side bend door but no luck. still the same, its not completely hot when the AC is on it is just warmer on the driver side compared to the passenger side. Its like the blend door is half...

I did a guide on how to replace the clock sping https://www.explorerforum.com/forums/threads/steering-controls-not-working-fix.496101/

I had issues with steering controls not working or intermittently working on both sides, , Turn out the issue was with the clock spring, here are the steps I took to replace it Steps to de-arm the airbags 1.Make sure the explorer is parted straight and the wheel are in straight line. 2.Turn...

MY passenger side seat stopped reclining , it would only come forward but not go back. Have looked at videos online, they all talk about replacing the switch which is an expensive option. I thought would take it apart and do a bit of a clean and see if it works. HEre are some pics I took along...

I am thinking of replacing the switches and came across this section on the workshop manual about SRS Airbag re powering procedure Can anyone explain steps 2-5 as in why it is required? as opposed to just reinstalling fuse 37 and reconnecting the battery?

True, But these are LED bulbs with life time warranty ( I went for decent with proper heat sinks not cheap ones off ebay). Also these are the same light that flash when you lock your car and are also the DRL, so you will know if they stop working.

In case anyone else is having hyper flash issues, This is how I was able to fix it, No need to install load resisters etc ( after all idea is not to draw loads of current). I went into Forscan software and in the Configuration section BDCM module and disable the turn signal fault detection...

Has anyone installed one of these in their Explorer Touch screen Media center

Thanks for the reply, IT went into blank screen mode after the first reboot and didn't do anything for over 40 mins. Anyway I am sorted now, After bit of a panic and kicking myself for doing starting the update, I remembered I had the ford app on my phone that connects via Bluetooth dongle on...