Search results

@transman304 I got the Transmission from PTS Reman Transmissions so Rebuilt / Reman Transmission for $1400.00 roughly "Likely a missed ground strap or connector that didn’t fully get seated." Could you elaborate on what you mean in regards to Ground Strap or Connector didn't get Fully...

@JK080 Could You weigh - in on this .... Will I a have to replace this Transmission & TC ? Goodmorning, Hope everyone had a Good Christmas Holiday, I Recently replaced my Motor and Transmission (incl: Torque Converter) The Truck is Running Great and the Transmission seems to be operating...

@410Fortune Please I need the ISS Sensor and Pigtail Connector 5836 Hefner Village Court OKC, OK 73162 For now I'm going to use the original 1 ... because only the housing is slightly chipped I have the Pigtail already.

Hello, @410Fortune @DILLARD000 I'm trying to pinpoint the Correct Part Numbers for Intermediate Shaft Sensor (ISS) and the Connector / Pigtail for that Sensor ?? O'Reilly's gave me the Output Shaft Sensor and Pigtail Connector which brings another question are the Pigtail Connectors the...

@410Fortune @DILLARD000 Having yet another issue... after test driving truck.... the O/D light is Flashing...took to a automotive shop down the street from me and they Pulled Code P0741 "TCC Stuck Off" I just bought a TC yesterday from O'Reilleys... because we had issues with the Pilot stud...

@410Fortune Actually the Housing on the Speed Sensor and the Female Connector (not sure of name ) needs to be replaced (See Pics) Sensor Greend Piece Can That be replaced without dropping Transmission Again Also Torque Specs for Bell Housing ?

I'm going to get it now. What are the Torque Specs for the Bell Housing for 5R55E ? I can not find a definitive answer any where.... Not even local Ford Dealership

@DILLARD000 I have an App Called OBD Auto Doctor ; just a cheap Reader from Androied Play Store From what I can see it doesn't Read Transmission Codes What is a relatively Good Priced Transmission Reader ? Let me add.. the Exhaust is Not Finished: It is Connected From "Exhaust...

@DILLARD000 Got It.. It was the only Hose not attached... but it wouldn't "Reach" until I Re-Routed it That One. Thank You One other Question: The O/D light is Flashing which indicates an issue with Transmission. The Truck is Running and Driving.... Drove about 10 miles so far. I did...

Hello @410Fortune @DILLARD000 at Stage 9.9 of 10 Missing a Hose Not Sure where it Runs to? (See Pic) Highlighted in Circle Yellow

Copy that ...Thanks for install lead ...got it ...dont start TC nuts until tranny fully bolted up

Copy that @410Fortune ... Yes Waiting on Flexplate and Starter Shims "Just in Case" I need them if not I'll return them. and I do plan on getting TC Studs lined up and get the Nuts Started but not tightened down before fully tightening Bell Housing Bolts. Where you able to see video? that...

@donalds Where you able to see the video I posted above? You mentioned having your old Flexplate .....does yours have play in it sitting on flat service ?

@410Fortune @donalds Let me know if you can See and Hear Video below Here is the Short Video on my flat Counter Top (which hopefully is 100% flat lol) Hopefully you can here the "Play" as I push on it. Flexplate Play Video Click Link

By my Buddies account the Flex plate had a little play in it. let me see if I can get a video of it on a flat surface.

@410Fortune I agree on 5th nut being in there.. here are some pics of the 1 I Believe was the "5th" I through it in a bag with the Rest so to be 100% honest I'm not sure which 1 was in the Bell Housing but this 1 had the most Scuff marks.

@410Fortune @donalds Yes exactly... I was referring to the Bushing Spacer... Initially we thought it was missing until unbolting the Flexplate (It's pictured above) so this is what we did.... Before Removing the Flexplate and Bushing Spacer behind it.... We put the Starter into the Starter...

@donalds To Clear Things up on Terminology.. I do have the Bushing / Spacer behind Flex Plate (This is What Ford Dealership has it listed as) (See Pics) That's what I was referring to and You were Correct not the "Width" but the Thickness is what I meant. What You are Referring to is the...

@donalds Could you explain that picture ... What is the spacing of the 1.76 mm?

@donalds The Flexplate was facing the Correct way and the Spacer/Block Plate was behind Flexplate. Do you happen to know the Width of the Spacer to make sure it is the correct one ( We took over Job from another guy who we don't trust did everything right)

@410Fortune Buddy just arrived and we held the New Starter up to Flex Plate and the Gear on the Starter(when Starter is Retracted) still touches the flexplate if that makes sense....So Is there supposed to be a "Spacer" of some sort behind the Flexplate so that when the Starter Retracts...

@410Fortune (See Pics of Flexplate after getting Transmission Unbolted from Block) and Pic of TC has a very slight nic in it at piece that goes in Engine block (Last Picture) It was sitting right at bottom of TC in the Bell Housing.... I don't Believe it ever made contact with the Flex plate...

@410Fortune ; There were 8 Bell Housing Bolts, I missed 1 and realized it when I went to pry Tranny from Block Got Transmission Pulled from Engine Block and found that 5th Nut to TC.... (Only need 4 lol) Glad we pulled it back off ...My mind was playing tricks on me Or more importantly I...

@410Fortune A really Really Rookie Question... but How Many Bell Housing Bolts should Bolt up on the 5R55E In Process of Re-Pulling Tranny and Only Pulled 7 :eek:( I know.... I know.... :( ) I'm guessing 8

@410Fortune Good Deal.... Again Just Wanted to Make sure I wasn't missing a vital Sensor :) May have already said this: but going ahead and pulling Transmission and Replacing Flexplate and double checking everything on back end of engine block, TC, and Bell Housing I'll send update. also do...