Search results

I bought a new fuel pump for my 2003 Ford Explorer Sport Trac but can not find the right fuel line connectors. That are two different sizes (see images). Which connectors do I need and where are they available?

Hi, My 2003 Ford Explorer Sport Trac passed an Exhaust Emission Remote Station and has an observed reading of HC (ppm) 348 and failed. (BAD) The remote sensing standards are HC (ppm) 338. (GOOD) Can anybody tell me what this 348 vs 338 means?

Can it be that this power side view mirrors problem has something to do with my 4 power windows? The power windows are no more working (can not open the windows). Thanks.

The power side view mirrors of my Ford Explorer can be adjusted up and down and to the left but NOT to the right (both mirrors the same). What could be the reason?

Hello, I still haven't check relay or fuse (where can I find it) but all for power windows do not work and also the side-view mirrors turn only to the left but NOT to the right. Any idea? Thanks.

It's still off!!!

J_C, I used a multimeter with long probe leads, to check for continuity between the connector of the ABS module and the connector to the ABS sensor as you told me. The green/black wire had no continuity. At the very top of the harness there was a little, little cut (see image). It was difficult...

I checked the ABS- module connector pin 21 and 22 but there is no continuity. For the other option pin 1 and 16: pin 1 doesn't exist. How can I remove the cover form the connector to see to which pin goes which wire? Thank you.

Hello J_C, I'm happy to hear from you!! I checked the voltage of the harness connector once again and it is on one side a positive voltage and on the other side a negative voltage. Could be the reason that I switched the wires to the connector?

Hello J_C (and all the others), I'm back. Question: With the motor running what Voltage should be at the connector of the harness of the wheel speed sensor?

I connected the wires with 'Dorman - Conduct-Tite 16-14 Gauge Butt Waterproof Connector, 10 Pack, Blue' but it seems so that there is still a loose contact. It worked and light and code was gone but with some light bending of the butt connectors the light is back on. Welding is not an option for...

J_C, The ABS light is OFF!! It was the connection between the wires that failed (white to red/green-black). I connected it under the truck with crocodile clamps and the old abs sensor. Thank you for your time!! I learned a lot and saved money! Also to have this $26 scan tool with the laptop is...

Thank you very much!! I cut the wires and then I connected the connector (repair part with white wires) with the old ABS sensor (the new one is installed in the truck). With the multimeter I got 1945 OHMS. That means that the old ABS sensor and the connetor with the white wires are OK. Correct...

Also ForScan shows that it is the Rear Speed Sensor (see image). Next step: The other images I attached show the disconnected connector to the ABS sensor. It also shows that the connector/wire was repaired before. It is a red and a green/black cable. Question: Is there a left side and a right...

J_C, I really don't want to bother you and thank you for all your help (I learned a lot...and you know a lot :-) I prefer not to download whatever version: On Google Play I can find only the paid version. And here? Which is the free version for Android? FORScan Lite for Android: Download FORScan...

FORScan Lite: https://play.google.com/store/apps/details?id=com.astech.forscanlite That's the one?

For both BAFX in the Amazon page: https://www.amazon.com/dp/B005NLQAHS/?tag=serious-20 Under 'About this item'.

Thank you for all the help! For both BAFX scanners it says: 'This OBD2 scanner does not read ABS, SRS, TPMS or Oil Change lights;'. I think also the Torque Pro doesn't support ABS but the FORScan does support ABS I switch the app? Thank you for all the help!

J_C, Thank you very much. The BAFX WIFI OBDII Reader arrived. I installed the Torque Pro App and reader and truck are WIFI connected. I also removed the ABS module connector (see image). In the wire diagram you sent me there is a light green/b;lack wire and a red pink wire connected to Rear...

J_C, Thank you for all your help. Could it be that you could give me a hint how to remove the connector of the ABS module? Is it the whole connector or only the lower part where the wires come out? Better to ask than break it. Thank you.

I went under the truck and disconnected the connector form the ABS sensor (see images). Also I attached an image of the old ABS sensor. At the ABS connector (not the sensor) what resistance should I measure? Can I use the multimeter here? I put the multimeter in 2000 Ohms and 20k Ohms and there...

I ordered your recommended scan tool. Should be here on Saturday. Thanks.

Thank you J_C, The BAFX OBD2 for $26 seems to be better. Or not? What else do I need? I have an Android Devices. And the Forscan app? That's the one: FORScan Lite - Apps on Google Play Thank you very much for your time!!!!

That's the ABS module (see image)? Can I check here something? Wires, etc.?

J_C, I deleted the code with the scanner and disconnected the battery for some ours but the light stays on! After this I drove an hour. I found in this thread: https://www.explorerforum.com/forums/threads/how-to-turn-abs-light-off.294040/page-2 the following: To check if the wheel sensor is any...