Search results

4wd out It sounds like the tire tread might have hit the motor or wires to the motor to engage the 4wd,on the back of the tranfer case there should be a connection between this motor and agroup of wires that go th the control unit in the side (back where your jack is located if you press the...

GAS Here in Saint John New Brunswick Canada it is .82cents a litre wich works out roughly to $3.24 a gal for 89 octane and ther is an OIL REFINERY IN TOWN!!!!!!

Hey guys! I'm having a problem ,it doesn't matter if its hot or cold, when you try to start the old girl(1991 XLT)it kinda drags,and it takes a couple of tries to get it to start,lately,it will roll over once or twice then I just get a click! any ideas????

It is called a tamperproof torx, a set for a screwdriver will run you about 20$ most autopart stores will carry them, they also come in handy when you have to take the electric motor off of the T-case tom clean the contacts inside.

One thing you might want to check is your ball joints,when bad,they can cause the hub to ingage(from the angle the tire change) also check the hub,make sure its got lots of grease it might be just seized. I had the ball joint problem .

Re: Hey WAIT!!!! Thanks! I am taking the truck to a buddies garage, he has a hoist, so I'm going to check the motor, Idiconnected the box in the rear fender and pressed the little white button, the LED blinked 4 times,Somewhere...

When I press the button on the dash to engage the 4wd, nothing happens czn anyone help me with this problem?

Trannys are a very big weak point of mine, would this problem cause erratic shifting @ around 60-70 mph ?

I can't run lo octane fuel either unless its 93 it ticks especially under a load/aceloration

I did mine myself,It isn't adifficult job . The hardest part is getting the large nut that holds the rotor tight to the spindle off I can't remember the size of the socket and I couldn't find one to buy' so I borrowed one. As for the rest, pretty simple ,just make sure the nut is no to tight or...

Mine ticks also,changing to 5w30probably won,t make much of a differance the climate here in New Brunswick Canada is pretty much the same as New York also, a mechanic buddy of mine told me he could change the lifters and probably within 6-8 months the ticking would be back.Try the ATF idea that...

ThankS I'll try it tomorrow

Could you please explain to me if you mean the signal arm on the steering column or somewhere else (I'm pretty dense sometimes)I have the same problem and I can't figure it out

I AGREE 100%!!!!!

91 XLT 150 000 miles, I bought it in may '00 I have replaced-wiring (melted by exaust)auto hubs (twice),front wheel bearings ,rear shocks,rear brakes,washer pump (front) wiper motor(back) & Pinion and carrier bearings in rear end (this week!)

David, if you have a good supply of waste oil, there is a company out of Great Neck NY (THOMAS&BETTS)they make a furnace that burns waste oil (used motor oil,transfluid,hydrolic oil, and as youknow,alot of people change their own oil they are not very expensive and if you can repair an...

The new Chevy Avalanche look pretty cool I think one of those ,or the cherokee.

Well,I have a new noise,a very bad growling coming from the rear end ,I have been told it is the pinion bearing!

Well, I've got the clickity click,the tickity tick when it cold,the thump from the radius arms,the rattle from the subs,the whining of the tires,and right now I have a vibration of my exhaust rubbing against the cross member,and I almost forgot ,the whining of my girlfriend because WE have to...

I recently took my 91 XLT to a friends garage to clean it up after playing the day before. I noticed a noise only when I gave it gas, took it to a trnny shop, they are under the impression that it is the bearings in the rear end . I'm really not familiar with rear ends or differentials.they are...

I drive a 94 F 150 as a company truck my o/d light was blinking and also the electronic odometer was gone ,Ichanged the fuse and alls good . I hope that helps

Hey Everybody . Where I am new to this,Ijust wanted advice on improving my 91 explorer XLT for some off road trips any info would be apreciated.