Search results | Ford Explorer Forums

  • Register Today It's free!

Search results

  1. M

    96 Exloprer XLT - Headlight problem

    I will check them with a meter but how would I check the hazard connection? I understand checking the fuse but would I have to look up the schematics of the wiring for the hazard conections?
  2. M

    96 Exloprer XLT - Headlight problem

    I removed the MFS (the new one), checked it for any damage as well as looked at the wires and when I re-installed it into the steering column, everything worked except for the hazard lights. I threw the old MFS away. Could there be any fuses that I am missing associated with the hazard...
  3. M

    96 Exloprer XLT - Headlight problem

    It works!!! I removed the MFS from the steering column and replaced it. Now everything works (except for the hazard lights) and the car starts. My only question now is, why are the hazard lights not working? When I push the hazard button to 'on' the flashers do not work. When the hazard...
  4. M

    96 Exloprer XLT - Headlight problem

    'Shorts out' meaning all the power dies in the car. I unhooked the battery and then hook it back up to get power back. Something strange happened last time I did it before I quit trying - I tried to start the car and the power died but after about 30 seconds it all came back on again. I just...
  5. M

    96 Exloprer XLT - Headlight problem

    My headlights didn't go on in my '96 XLT. When I turned the switch, all the lights worked except for the headlamps, hazards and fog lights (corner lights, taillamps all work, interior lights dim.) The high beams work when you hold the switch toward the driver, but not when you push the switch...
  6. M

    Headlights won't work...'96 XLT

    I have a 96 XLT and had the same problem as the original post. I went to Autozone and bought a multifunction switch and installed it. Now my headlights work, high beams work and fog lights work but my blinkers and hazard lights do not work. And even worse, when I try to start the car, the...
  7. M

    Spark Plugs

    Thanks It is a 4.0L. So the middle one on the drivers side is it. Thanks alot for your help.
  8. M

    Spark Plugs

    I have a 1996 XLT Explorer and am wondering which plug corresponds to the #5 cylinder? Thanks in advance
  9. M

    Code PO305??? Head Gasket Repair....

    I took my car to the dealer and I am told that I need to spend either $1400 on new cylinder head valve gaskets or $5000 on a new engine. I have a 96' XLT with 120,000 miles and it runs good. There is a little shaking while idleing and my coolant resevour is always empty. So, I think that I...
Back
Top