Search results

BBay I take it you are convinced it is the rear sprag? Just to reiterate, it drives fine in all gears but in manual 1st there is no engine braking and then the no reverse. Does the fact that there is no engine braking bring you to that conclusion? I read alot of threads before I started...

I think I have read every other no reverse thread and they all just kind of end. I am dropping the pan again to see if I have issues with the low/reverse servo. If thats a dead end I guess I will remove the valve body again and check out the 205 bore as suggested in another thread. Would like to...

Yes I had the problem before. Thats why I did the TSB's. Like I said I found missing gasket material at the reverse servo and thought that was the problem. No other work that I can tell. There was hardly any metal on the pan magnets. Also it has every gear including manual 1st and 2nd...

98 ranger 4wd 5r55e trannie. Did the valve body TSB's Seperator plate and blow off valve. When I removed the valve body I had gasket missing at the Low/reverse servo, so I thought I had this problem whipped. No go still no reverse and no engine braking in 1st. Other than those issues this tranny...

That would be the one. You guys are phenominal. Hope I spelled that correct!

Help!!!!! I dont know if this is in the right place to ask this since this is a sticky, but I see a lot of questions here so... Im doing the VB rebuild and I break one of the first rules. I turned it up and lost the puck. Can someone send me in the proper direction to get another. If I have to...