4wd does not disengage | Ford Explorer Forums - Serious Explorations

  • Register Today It's free!

4wd does not disengage

  1. M

    98 explorer xlt 4.0 sohc stuck in 4 hi

    Hey guys, this is my first post. My explorer seems to be stuck in 4hi. Just over a week ago I had to have my truck towed due to fuel pump going out. The tow truck hooked up and we were on our way, bout five miles later errrrrr, pull over and the passenger front wheel locked up. Well he put on...
  2. R

    4wd low but no 4wd high ADVICE NEEDED!

    Long story short my 4wd low engages but my 4wd high does not. The dash indicator lights up when switched into 4wd high but there is no affect on the front axle and no sound from the tcase. In snow the rear tires only spin when in 4wd high, ive done a few parking lot test both in and out of the...
  3. M

    Drive Train Fault Light Question

    My wife's '06 Explorer developed a fault with the 4WD, based on what I was able to understand from the brief description in the manual for the information panel icon that looks like a wrench. My wife said this lamp illuminated when she started up a hill after making a right turn. She also...
  4. J

    2003 4WD Problem

    Alright just to start out I have read hours worth of information on this site. My problem is with a 2003 explorer xls. When I start the vehicle both 4x4 lights go on and off as they should. Within a couple minutes i start to get the 4x4 high light flashing. It flashes 10 times every...
  5. S

    4WD does not completely disengage

    I have a factory '94 Explorer XLT. When I push the 4X4 button on the dash to turn off the 4WD the light goes off but when I drive it there is a loud sound like when you put playing cards in your bicycle spokes as a kid. It comes from the left front wheel and increases in frequency as the speed...
Back
Top