95

I ****ed my frame up i go through about 6 sets ofnsway link endds a a year a buddy had a 2000 with a bad motor good trans what issues eill o rum intp puyting my motor and ecu into that ride

i was wondering if anyone had drilled and tapped the back sides of the lower intake manifold. i was curious about adding a coolant crossover since the rear passages always seem to have more gunk or just blocked up.

I was looking for some insight into what years have headliners that would work with my 95. I found one with a headliner in good condition at a local scrapyard but the cutouts aren't the same. I was wondering if it would still physically fit or not. Pictures below. I was also wondering if the RAP...

I'm looking for some help with a 95' ford explorer. Having a lot of issues with it right now and I'm trying to figure out the cheapest way to resolve it. Any help would be appreciated I know some basics when it comes to vehicles but I do not have any in-depth knowledge. Trying to put as little...

Hello, I have a 1995 Ford Explorer Stock 4-door XLT which has the stock 235/75R15s. I plan to replace the wheels with a 17x8 and 10mm Offset. The Stock offset is 12mm so the 10mm should be very close to stock. Now for the tires. I want to go as big as I can without any rubbing or issues. I...

About 4 days ago I bought a 95 Explorer. I was told it had just started slipping in transmission so the nd "mechanic" changed the fluid and filter. I went to see about trans flush yesterday, but to start with the shop confirmed my thoughts, the " mechanic" filled transmission 2 1/2 qts...

95 4.0L. It Starts and then dies after 10 or 15 seconds. New pump and filter. Ist it possible I didn't connect the pump right? There is a steady flow of fuel from test valve. Maybe fpr? I don't Jane test gauge. Can I use a water pressure test gauge? Or air gauge? Please help I'm missing work...

On the way to the Coke Ovens