brake line

Hey guys, Brake Hydraulic Hose just got broken on my Explorer(2013, 3.5). Looking at the pictures(attached), everyone mentions it looks too short or stretched. It`s a front right side but the left one looks similar too. I`ve searched and bought a replacement on Rockauto(Sunsong one) but the...

Hi, I just bought a 1991 Ford Explorer EB with factory tow package.... I'm a girl, and this car has service records, no blown head, and low miles on warranty engine.... the tow package should help avoid tranny issues.... it's all about the budget.... no owners manual...unfortunately.... I am...

So I ended up blowing my brake line from the master cylinder to the rear and from the master cylinder to the front. I was just wondering how hard it is to change the brake lines plus hoses, especially the line going to the rear since it runs between the fuel tank and the frame.

i recently bought a very nice limited edition 93 Ford Explorer, very happy with the purchase been treated very well and it's a beaut. However the rear driver side brake line rusted out an so during the process of replacing it I did a dumbass move and straightened out the old line to measure the...

Hi all, This is on a 2003 Explorer XLT 4.0 with ABS but without traction control and advance trac The problem I'm having is a spongy almost limp feel to the brake pedal and a distinct hissing sound inside the cabin when pressing the pedal. Almost like a whooshing sound. I'm assuming it's...

Hello all- I picked up a new MC for my '98 XLT (four door and w/ cruise control) and noticed that the rear fitting is larger than that on the stock MC I am replacing. The fittings on the stock MC are the same size. Has anyone who's replaced an MC had this issue and, if so, do you know what...

For the last month, my explorer's brake have been very weak. i have to press the pedal 3/4 of the way down before it starts to stop but if i press it completely the front tires lock up. well yesterday i was driving it back from the gas station, and as the explorer came almost to a complete stop...

So I am in the process of getting the X road worthy...my current project is brake lines. I am replacing the main line to the rear due to a leak where it connects to the rubber line in the rear. Oddly enough the only problem I am having is removing the rubber line that runs from the junction with...