reset

I just took my 2018 base model Explorer to JiffyLube for its first oil change since I bought it a few months ago. There was a new message on the info screen that said something like "long press OK to reset oil life". Which I did. And it gave me the "oil life reset" confirmation message. But then...

I have a 2008 Mercury Mountaineer that I was investigating replacing the radio. I took apart the dash bezel, and unplugged all the connections. I reinstalled and everything worked fine. I then took it apart again, and when I connected it again, the Info, Setup and Reset buttons no longer...

I have an 2003 Ford Explorer Sport Trac XLT 4WD. It was a repo and I got the vehicle for under $900. The one who had it was rough as hell on it apparently, so I am having to work on it. I went to have it inspected and they said it was showing not ready. I hooked up the two scanners to it to...

Hi, Helped a friend diag a bad alternator in a 2004 Explorer w the 4.0. Orig battery was replaced prior to my involvement. As I am new to Fords (2014 Escape SE), I know the newer smart charging systems require a reset to zero out the age and stored perfornance data when a new battery is...

Two days ago I couldn't start my truck in the morning, no click, no crank, but power to dash/accessories. But was able to start truck on first attempt in the late afternoon that same day, which had been sunny. I chalked it up to moisture, and the next morning after an early a.m. rain shower I...

This problem has been driving me crazy for months now and no one seems to know what the real issue is. I will try to give as much info as possible because most the fixes I find for this issue don't apply to my situation. I bought the car used. I took my car to get new tires and after they...

2004 Ford Explorer... Here is a problem I have been fighting for a while. One day after heavy rains, I noticed the lights, radio, and door locks would not work. Fixed these with the WD-40 in the door switch as noted on this site. NEXT.. had another bunch of situations. I reset the VSM...

What are my options for resetting the codes? i got a code 52..which happened when i was doing some electrical troubleshooting and had KOEO with one of the harnesses disconnected. So far i heard the dealership will do it for a large fee... I can cycle the ignition 250something times and it...

My 2004 Explorer XLT was working just fine yesterday until I went to remove the ignition key at one stop and the horn continuously blared until I re-inserted the key and turned the ignition back to the ON position! It also appears the now the red light in the center of the windshield is always...