stud | Ford Explorer Forums

  • Register Today It's free!

stud

  1. J

    2011 positive post main fuse stud has a wire

    11 explorer 3.5 4x4 positive batt connect has like 100 amp fuse stud nut each side. The rear stud closest to firewall has a wire loop under the nut looks factory but all mine had is the loop and no wire. Does anyone know is it factory and what does it power? I looked behind batt box all i see is...
  2. The curved pliers are holding the stud.

    The curved pliers are holding the stud.

  3. S

    Sheared Transmission Mount Bolt

    Is it as simple as unbolting the bolts on either side of the assembly or is there more to the story? Also, any advice to keep from shearing the other bolts? I plan on testing on a pick n pull truck tomorrow, but lets face it, I don't know squat about this part of the vehicle. Thanks for...
  4. F

    Broke intake stud/bolt

    Hey everyone, I am in the process of cleaning/ replacing intake gaskets on my 94 explorer with the 4.0 OHV. While taking the fuel rail off I broke an intake stud. Is there some website where i can buy a new one/ set? or is my best bet to go to a pull a part and get one? Thanks much.. Justin
  5. New wheel stud being installed.

    New wheel stud being installed.

  6. A wheel nut (lug nut) pulls the stud into position.

    A wheel nut (lug nut) pulls the stud into position.

  7. Double_Cardan_U-joint_1

    Double_Cardan_U-joint_1

Back
Top