troubleshoot | Ford Explorer Forums

  • Register Today It's free!

troubleshoot

  1. T

    2005 Explorer No-Start

    Alright, so I’ve scoured the posts so far and found great info, but I’m left scratching my head... my wife’s 05 explorer won’t start. Quick history... Timing chain rattle led to full timing service. Car cranked at first, but had an oil leak. Fixed that, cranked and ran fine for a few minutes...
  2. B

    2018 Sport inconsistent acceleration/boost

    Hi all, New here and far from a car expert but have been digging around a ton through the posts and haven't seen this issue. I'd love all your input/guidance please! I have a new 2018 Sport that just crossed 2,000 miles. All stock everything. Overall I love it but unless I'm crazy (and I...
  3. P

    99' explorer sport front end humming

    Ok so I have a 99 explorer sport with a 5-speed 2wd with roughly 120,000 miles. I have this insane pulsating humming coming from the front left wheel well/engine compartment that's slowly been getting worse. So far it only starts once I'm over about 30-35 mph, anything lower and dead silent...
  4. 0

    Power windows quit working

    Here is my 1996 Explorer XLT I purchased for $1000 over 3 years ago with 90,000 miles, 6disc changer and a sunroof. I recently had issues with my windows not wanting to go down except when the door was open or cracked. Then the windows stopped working all together. I wasn't sure if it was the...
  5. J

    2003 Sport Trac - Randomly Blows Fuse while in Park

    Greetings. I have a 2003 Sport Trac XLT 4WD 4.0 SOHC that I purchased new and it's been a fantastic vehicle. It has 232,000 miles on it and still going strong with NO major part replacements to date. Recently, it has started to "randomly" blow the fuse that controls...
  6. F

    Help Please- Radio Problem

    So I was working in my girlfriends 2005 Sport Trac, and thought it would be nice to install some led strips in her footwells (done it plenty of time in other cars.) She has the stock radio, so (with everything disconnected of course) I cut constant line and splice in the positive light line...
Back
Top