vct | Ford Explorer Forums

  • Register Today It's free!

vct

  1. B

    VCT Maintenance, etc.

    I finally ran out of excuses for not doing the VCT overhaul. I was somewhat motivated by the increasing frequency of the start-up rattle,which started at about 135k and has increased in frequnecy ever since then. I replaced: Phasers + sprockets Chains Tensioners + guides Solenoids (I also...
  2. R

    VCT (variable cam timing) seals leaking - 2013 PIU

    2013 PIU, 94K, well maintained. Synthetic oil. I had planned on doing my plugs and PCV before winter, so since the manifold is off, why not address my VCT seal leak too. Also called a VVT (variable valve timing) it seems. Also, since I have the valve cover off, is there any advantage to...
  3. S

    Salvage Yard PCM Replacement

    I have a 2008 Ford Explorer Limited 4x4 4.6L V8 SOHC. I have diagnosed a problem with my VCT solenoid actuation back to the PCM. It is not grounding the circuit to energize the solenoids. I get P0010 and P0020 DTC codes for VCT open circuit. Wiring checks out OK to the PCM/connector. The problem...
Back
Top