'01 Ranger 4WD, Brake Drum Conversion Help

[Jackal43x]

I am seeking assistance with removing the drums off my '01 Ranger and upgrading them you Rotors/Calipers and the like. I have done so searching around these forums, maybe I haven't been hitting on the correct key words. Any help would be greatly appreciated.

 

[RangerX]

I would look in the modified first gen section, if you haven't already.

 

[Rhett]

SSB Performance Brakes offers conversion kits:
http://ssbrakes.com/

And as mentioned the 1st gen section has lots of threads on this. You may need a '95 Explorer master cylinder too, depending on how squishy your pedal is after you're done.

 

[Jackal43x]

SSB Performance Brakes offers conversion kits:
http://ssbrakes.com/

I appreciate the help! I have not heard of that brake site before, that will help me a lot on other projects as well!

 

[1996xlt]

Rear discs (from the caliper mounting bracket on the axle out board) from a V6 or V8 Mustang MY 94-04 will fit your needs. Sorry EF I have to plug another forum for this (but use this site all the time over there as well.) The very detailed instructions at : http://www.therangerstation.com/tech_library/ford_ranger_rear_disc_brake_conversion.shtml

 

[RangerX]

I link stuff from there often, good info is good info!