02 factory radio | Ford Explorer Forums

  • Register Today It's free!

02 factory radio

02LTDXLT

Active Member
Joined
October 8, 2007
Messages
64
Reaction score
0
City, State
the "Bridge",Va
Year, Model & Trim Level
2002 limited XLT
Does any one have a factory radio for a 02
limited explorer? this would be the 6 disc cd
player. right now it has the single cd player
w/ tape player.
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Does any one have a factory radio for a 02
limited explorer? this would be the 6 disc cd
player. right now it has the single cd player
w/ tape player.

i have one that came out of my 04 eddie bauer if it is the same thing. it is a 6 disc in dash changer. and i would definitely be willing to sell it. send me a pm if you are interested.
 






i have one that came out of my 04 eddie bauer if it is the same thing. it is a 6 disc in dash changer. and i would definitely be willing to sell it. send me a pm if you are interested.

could you post a pic? this is the one that has the hook up for the sub?
 






could you post a pic? this is the one that has the hook up for the sub?

here it is, front and back. and yes it has the output for the factory sub.
 

Attachments

  • 44 007.jpg
    44 007.jpg
    75.4 KB · Views: 331
  • 44 008.jpg
    44 008.jpg
    80.9 KB · Views: 311






display works? radio works? cd player works? how much? are the only other questions i have. lmk
 












How did you get the trim off that goes around the radio. I can't seem to get mine off and I don't want to break it.
 






How did you get the trim off that goes around the radio. I can't seem to get mine off and I don't want to break it.

use a panel remover if you have one, if not, a flathead screwdriver will work. i start with the top left corner and once i get enough up for my fingers to get underneath, i work my fingers around the rest of it until it is off.
 






I also used a flat head screw driver. I put the screwdriverin at the top middle of the trim and slid it over to the right. when it stops it is right next to the clip. popped it out and did the same to the left top side then just worked my way around. gl
 






Featured Content

Back
Top