2002 Aftermarket nerf bars...need help

[Drew0682]

This is the second one I have bought off of ebay for my friend's Explorer.

http://www.ebay.com/itm/29091923560...em=&sspagename=ADME:X:RTQ:MOTORS:1123&vxp=mtr

Here is the problem, the holes don't line up for the screws that are from the original running boards we removed.

I have photos, but can send to people to see the problem we are having.

unless someone can point me in right direction to upload them

Thank you for any help

 

[DaaQ]

upload to imigur or photobucket or some sort, then link the URL

 

[Drew0682]

http://s963.photobucket.com/user/drew_perry1/library/

this should work. should be open for people to see

now these are the first set of rails and mounting brackets. difference now is how low the bracket goes to hold the bars in place

 

[Drew0682]

the other issues is getting the long bolt to screw into the clip nut as the long bolt has to go through a long space. i prefer to have a smaller dia space but not sure if this would help

 

[DaaQ]

Seems like you may need to re drill the holes. Or return the product. Depends on which way you want to go.

 

[drdoom]

Preferred Image

upload to imigur or photobucket or some sort, then link the URL

No, upload then copy the code for forums/boards, then paste directly into your post. No offense Daaq, but your method is problematic for mobile users.

 

[DaaQ]

No, upload then copy the code for forums/boards, then paste directly into your post. No offense Daaq, but your method is problematic for mobile users.

NP, it was something I read on here a little while back. Without the sub option, was the way I had done it. Now with the sub option, it looks like there is more functionality, as in able to upload directly.

 

[drdoom]

I use photobucket, but there is almost no functionality with my Android. YMMV