mercury13
New Member
- Joined
- August 23, 2010
- Messages
- 1
- Reaction score
- 0
- City, State
- Phila. Pa.
- Year, Model & Trim Level
- 2002 Limited
Hi everyone, I'm a new member looking for some help w/ a window problem. I checked the threads and was able to rule out a couple things but still looking.
2002 Limited V8
The passenger switch quit last year and the driver switch was going recently when I found if I pushed it at a 45 deg. angle it would function. It stopped the other day and pass window is stuck down.
There is 12V on the bl/bk wire on driver side in the ACC pos. Black ground wire has 2 ohms to frame. Tried to jump wh/yel wire to 12v bl/bk to raise window, no luck ( don't know if this would work anyway ).
Wires do not look pinched inside rubber flex / grommets.
I found the driver switch cluster online for $48 but not sure it will correct the problem. ANY suggestions or advice would be greatly appreciated.
Or even a way to raise window until prob is found.
Mercury13
2002 Limited V8
The passenger switch quit last year and the driver switch was going recently when I found if I pushed it at a 45 deg. angle it would function. It stopped the other day and pass window is stuck down.
There is 12V on the bl/bk wire on driver side in the ACC pos. Black ground wire has 2 ohms to frame. Tried to jump wh/yel wire to 12v bl/bk to raise window, no luck ( don't know if this would work anyway ).
Wires do not look pinched inside rubber flex / grommets.
I found the driver switch cluster online for $48 but not sure it will correct the problem. ANY suggestions or advice would be greatly appreciated.
Or even a way to raise window until prob is found.
Mercury13