dndsam
Active Member
- Joined
- July 12, 2009
- Messages
- 58
- Reaction score
- 1
- City, State
- Arlington, Texas
- Year, Model & Trim Level
- 2008 Explorer Limited
I am new to the community. I have visited numerous times and have found this site to be VERY helpful. Thanks to all for your insight in the past. I hope to contribute in some way in the future.
I have decided I want to try and hardwire my Garmin GPS into the Explorer. I am wanting to mount it and run the wires along the left side of the dash, which would put me close to the fuse box. I have 2 wires that need to be connected at the end of the lead.
Where do you your recommend connecting the wires? Is there a way I can use an empty fuse slot or do I need to splice the wires into something?
I am fairly mechanically inclined, but I figured I would run this by you all before I start trialing and error.
Doug
I have decided I want to try and hardwire my Garmin GPS into the Explorer. I am wanting to mount it and run the wires along the left side of the dash, which would put me close to the fuse box. I have 2 wires that need to be connected at the end of the lead.
Where do you your recommend connecting the wires? Is there a way I can use an empty fuse slot or do I need to splice the wires into something?
I am fairly mechanically inclined, but I figured I would run this by you all before I start trialing and error.
Doug