2003 Ford Explorer

[sluck9878]

Hi Guys,
Happy to be aboard. My Explorer's heat went out and the clicking sound tells me it is the Blend Door Actuator. I am a female who wants to take on this task of replacing it. I've look at videos and it doesn't seem that hard, just time. I noticed from this forum there is a step by step instruction on how to replace. But I can only see the instructions starting at #7 . I would like to know how can I find the whole instruction with photos before I take on this task. Had the thing replaced a few years ago and it cost me $700 at the dealer. Can't pay that again.

If anyone can help, please do. I can also be contacted via email. sandyanewme@aol.com

Thanks
sluck9878

 

[Spuddy]

Hi and welcome aboard!

Check out this link for "How To: Replace Blend Door Actuator in 3rd Gen Ex." http://www.explorerforum.com/forums/showthread.php?t=294140&highlight=blend+door

This is an excellent write-up with LOTS of photos and hundreds of posts...

GOOD LUCK!

 

[BigRondo]

Hi and welcome aboard! Check out this link for "How To: Replace Blend Door Actuator in 3rd Gen Ex." http://www.explorerforum.com/forums/showthread.php?t=294140&highlight=blend+door This is an excellent write-up with LOTS of photos and hundreds of posts... GOOD LUCK!