Jamal
New Member
- Joined
- December 24, 2014
- Messages
- 1
- Reaction score
- 0
- Year, Model & Trim Level
- Ford Explorer 2006 Eddie
i have Ford Explorer 2006 Eddie Bauer V6 Edition. I am facing a problem of acceleration. While moving the vehicle from STOP position, I have to accelerate it very very slow from 0-25 miles. If I press accelerator to the floor, the vehicle RPM shoot to 4000 and unable to increase the speed above 15 miles/hr. Then I have to stop the vehicle to ZERO, then accelerate it very very slow to 25 mile/hr. After 25 mile/hr, vehicle behave normal with normal acceleration.
At high speed, i.e. 75 mile/hr, I am facing an acceleration lag. When i press the padal, the RPM increase to 3500~4000 for 5-6 second. The vehicle speeds after 5-6 second and RPM return to normal.
Sometimes after passing the bump in high speed change the situation and vehicle can be accelerated normally from 0-25 mile/hr.
I doubt there is some problem with Torque converter Clutch Solenoid and wiring of transmission.
Please suggest the solution.
At high speed, i.e. 75 mile/hr, I am facing an acceleration lag. When i press the padal, the RPM increase to 3500~4000 for 5-6 second. The vehicle speeds after 5-6 second and RPM return to normal.
Sometimes after passing the bump in high speed change the situation and vehicle can be accelerated normally from 0-25 mile/hr.
I doubt there is some problem with Torque converter Clutch Solenoid and wiring of transmission.
Please suggest the solution.