macknos94
Explorer Addict
- Joined
- December 13, 2007
- Messages
- 1,453
- Reaction score
- 2
- City, State
- Harrisburg, pa
- Year, Model & Trim Level
- 2003 mountaineer premier
Here is what you will need to swap in a manual tranny with the 4x4 t case.
Tranny and slave out of 97 body style 4.6 f150 along with a manual t case from the same style truck. Clutch peddle out of 3rd gen along with the master. Then the hydro line can come from any manual 3rd gen ex.
As for the clutch and flywheel you just need one for a 4.6 f150. Last but not least a tune to cut out the electric tranny and t case stuff. It's a straight forward swap and you won't have to do much cutting besides the shift and t case shifter.
As for the drive shaft length I havnt gotten that far but they should be the right length.
Tranny and slave out of 97 body style 4.6 f150 along with a manual t case from the same style truck. Clutch peddle out of 3rd gen along with the master. Then the hydro line can come from any manual 3rd gen ex.
As for the clutch and flywheel you just need one for a 4.6 f150. Last but not least a tune to cut out the electric tranny and t case stuff. It's a straight forward swap and you won't have to do much cutting besides the shift and t case shifter.
As for the drive shaft length I havnt gotten that far but they should be the right length.
