HitnRun
New Member
- Joined
- February 10, 2011
- Messages
- 2
- Reaction score
- 0
- City, State
- Lodi, Wi
- Year, Model & Trim Level
- 94'
I'm sorry for re-posting this again. I found the site surfing, but can't seem to find the topic, and the search didn't work. Bare with me, it's been a long day! 1994 Ford Ranger 4.0 4X4(manual hubs). 4x4 push button lights used to flicker on and off all by them self with turned into them not working at all (seemed to do it when it was wet, then did it all the time). I took the following parts out of a Ranger with a blown motor, and they all worked. I replace the Transfer case motor, Transfer Case Control Module, and the push button 4x4 switch. Fuses all look good, but I'm not getting any juice at the TCCM for the blinking test. Like I said, it seemed like the lights on the push button 4x4 would light up, even with out being pushed and that was replaced, not blowing fuses, and seems like nothing is getting juice....what do you suggest? I'M LOST!
