5.0 Conversion... | Ford Explorer Forums

  • Register Today It's free!

5.0 Conversion...

jasonty

Active Member
Joined
August 27, 2003
Messages
60
Reaction score
0
City, State
Abilene, TX
Year, Model & Trim Level
1992 XL
Hey, I have a 92 XL, and I want to put a 5.0 in it... Is this a possibility? Mine has the 5 speed manual, so would a 5.0 bolt right up to my tranny? What all is involved with this? I know I have to change out the ECU and exhaust, but what about the wiring? Anybody know of any websites that sell a kit to do this? I'm looking for a reasonably priced kit too. Any help is appreciated...
 






Dead Link Removed

Lots of good reading there! Welcome Aboard!!!
 






Ok, well after reading that, I'm guessing my stock 5 speed won't bolt up to the 5.0, correct? I want to do this conversion as cheaply as possible. I bought my Explorer for $300, and all it needs is an engine. Can anybody recommend a company that sells a complete kit to install the 5.0 and T-5 into my XL? I want to spend around $1000 for the kit.... Thanks in advance folks!
 






Advance adapters has what you need. Contact Chief34 as he is almost done with that same swap.
 






Featured Content

Back
Top