eric©
Member
- Joined
- February 1, 2005
- Messages
- 32
- Reaction score
- 0
- City, State
- Detroit, MI (yeppers, redneck white boy invading D-town! :-P)
- Year, Model & Trim Level
- 1991 XLT 4x4
Adding some offroad headlights to the rig tonight, and want to tap into the high beam circuit for activation. Yes, I know its illegal, thats why I run a 3 position switch.
Pos 1=lights on regardless.
Pos 2=lights off regardless.
Pos 3=lights on/off with high beams on/off
Anyways, rather than just splice into the high beam wires near the headlight, I'd rather tap in at the relay connection itself. Still running additional relays for the off road lights, just want to use the high beam wires as switch signal for the additional relay.
Truck is a 91 XLT 4x4.
Pos 1=lights on regardless.
Pos 2=lights off regardless.
Pos 3=lights on/off with high beams on/off
Anyways, rather than just splice into the high beam wires near the headlight, I'd rather tap in at the relay connection itself. Still running additional relays for the off road lights, just want to use the high beam wires as switch signal for the additional relay.
Truck is a 91 XLT 4x4.
