911 Harmonic Balancer Problem (Crank Pulley) | Ford Explorer Forums

  • Register Today It's free!

911 Harmonic Balancer Problem (Crank Pulley)

ExplorerFREAK

Member
Joined
July 20, 2013
Messages
16
Reaction score
0
City, State
Vaudreuil-Dorion Quebec
Year, Model & Trim Level
2007 Explorer Limited
HELP !! ME ! PLEASE!!! ANYONE! I've gone to a dealer that had changed the Harmonic Balancer they charged me 500$ for parts and labor, and it was all great until i was literally 2 min. away from my house and the engine didn't go past 1500rpm and it would just bog and conk out engine light and wrench in the dash came on. I had turned off the ignition then started the truck up again perfect idle put it in drive hit the accelerator past 1500 rpm bog and conk out again. Can anyone Help me Please ? the dealer also changed the spark plugs and the crank pulley sensor I'm begging here Please Help me Thank you :( My truck is a 2007 Explorer Limited V6 4.0L
 



Join the Elite Explorers for $20 each year or try it out for $5 a month.

Elite Explorer members see no advertisements, no banner ads, no double underlined links,.
Add an avatar, upload photo attachments, and more!
.





Go back and tell them they did something to your truck as it's not running right now. Have them scan for codes. Maybe the part they installed, the pulley sensor, was bad? Check the spark plug wires. Make sure they are seated properly. Run a scan and see what the status is on your O2 sensors ~ as a side issue.
 






Go back and tell them they did something to your truck as it's not running right now. Have them scan for codes. Maybe the part they installed, the pulley sensor, was bad? Check the spark plug wires. Make sure they are seated properly. Run a scan and see what the status is on your O2 sensors ~ as a side issue.
They've put back the old crank pulley and it runs with no check engine light but the shake is still there ????
 






can i go to any garage to find out what the sensor is giving out? Thank you in advance 08EddieCA
 






Sure you can. It just depends on how "good" the shop is at diagnostics. Sounds like you need a new Harmonic Balancer. When my Harmonic Balancer went bad, my X felt like it had a flat tire. They may have simply used the wrong part. Are there any codes generated?
 






Dude, you need to go back to who did the work. In fact, I'd have called and had them tow it in. They need to figure out why it worked before and not after. High possibility they'll end up covering it.

Go somewhere else, all expense will be on you.
 






Featured Content

Back
Top