maniac_3_2000
Member
- Joined
- September 4, 2007
- Messages
- 11
- Reaction score
- 0
- Year, Model & Trim Level
- 1996 Explorer limited 5.0
I have set the same position that I would like for my seat on 1 and 2. Every time I unlock the car and get it though the chair moves an inch forward. eventually its to far forward and I can't get in the car without manually moving the chair back. I'v tried replacing the cpu under the chair, but that didn't help. I am wondering if the motor itself has some kind of sensor to detect exactly were it's at so it knows not to move when its at the right point.
Sometimes It also goes backwards instead an inch at a time, and eventually its to far away for my feet to reach the pedal's right, and I have to move it forward again, and for some reason it only within the first 5 minutes of unlocking the car, when i try and move it forward it only lets me move it an inch or two at a time (I have to let go of the button and push it forward over and over again to get it were I need it). Almost like the cpu is trying to say its in the right position.
Sometimes It also goes backwards instead an inch at a time, and eventually its to far away for my feet to reach the pedal's right, and I have to move it forward again, and for some reason it only within the first 5 minutes of unlocking the car, when i try and move it forward it only lets me move it an inch or two at a time (I have to let go of the button and push it forward over and over again to get it were I need it). Almost like the cpu is trying to say its in the right position.
