N1265
Well-Known Member
- Joined
- June 22, 2007
- Messages
- 238
- Reaction score
- 2
- City, State
- Fremont Oh
- Year, Model & Trim Level
- '04 explorer
Hi Guys,
Having trouble with the explorer starting, sometime it will start in Neutral but not park. sometimes it wont start at all until trying it a couple 3-4 times.
After reading a couple of threads witch talk about bypassing the neutral safty switch witch have 11 pin plug or 12 pin plugs ( mine has 8 pins ) I am wondering.
Could it be something else other than the switch ? I was under there today and the plug and pins look good, no frayed wires. seems to be adjusted in the right position. the wires on the starter also look good , clean and tight.
If I were to bypass it, where would be the best place to splice into the wire harness and what wires do I splice ? It doesn't seem to be a lot of room under there to solder wires together.
Many Thanks,
Having trouble with the explorer starting, sometime it will start in Neutral but not park. sometimes it wont start at all until trying it a couple 3-4 times.
After reading a couple of threads witch talk about bypassing the neutral safty switch witch have 11 pin plug or 12 pin plugs ( mine has 8 pins ) I am wondering.
Could it be something else other than the switch ? I was under there today and the plug and pins look good, no frayed wires. seems to be adjusted in the right position. the wires on the starter also look good , clean and tight.
If I were to bypass it, where would be the best place to splice into the wire harness and what wires do I splice ? It doesn't seem to be a lot of room under there to solder wires together.
Many Thanks,
