96 XLT 4D Washer Fluid Problem | Ford Explorer Forums

  • Register Today It's free!

96 XLT 4D Washer Fluid Problem

YamahaRick

Well-Known Member
Joined
August 7, 2001
Messages
111
Reaction score
0
City, State
Metro ATL, Georgia USA
Year, Model & Trim Level
1996 XLT 5.0
Real simple, yet annoying problem ... when I got my Explorer back from the body shop after a front end wreck, lots of little problems keep appearing. One of them is the window washer hose for the driver's side ... the hose was left open under the hood, and there's no obvious nipple for it to fit on. The passenger's side goes behind the firewall. I was looking for something similar on the driver's side, but could not find anything obvious.

Can anyone help me with this simple, yet frustrating problem?

Thanks in advance.
 






On my 96, the drivers side hose comes off of a T in the middle of the fire wall.
Theres about 10" of smaller tubing then it goes to a large diameter about the same length. The larger tube routes behind the wiper motor to a nipple just the above the center of the motor.
 






Back
Top