radcar44
Member
- Joined
- September 14, 2012
- Messages
- 21
- Reaction score
- 0
- Year, Model & Trim Level
- 2004 Explorer XLS 141K
I have researched other threads on this topic, but have had no luck getting help, so I'm opening a new thread.
I have no blend door problems that I know of; I have both heat and A/C available. My problem is with getting control over the where the air is distributed. Turning the control knob has no effect - the blower air seems to come out of all at all locations, at a very low speed.
I removed the console and found plenty of air coming out of the square duct there. I tried blocking this duct, hoping that would force more air thru the remainder of the system, but there was no change.
I then investigated the vacuum system, but so far, can't find anything. All hoses seem the be attached where they should be.
So I'm looking for ideas.
Thanks in advance.
I have no blend door problems that I know of; I have both heat and A/C available. My problem is with getting control over the where the air is distributed. Turning the control knob has no effect - the blower air seems to come out of all at all locations, at a very low speed.
I removed the console and found plenty of air coming out of the square duct there. I tried blocking this duct, hoping that would force more air thru the remainder of the system, but there was no change.
I then investigated the vacuum system, but so far, can't find anything. All hoses seem the be attached where they should be.
So I'm looking for ideas.
Thanks in advance.
