Air box where to get the Kkm

[YoungMoney_Twitch]

I’ve read here about the KKM True-Rev Sport Induction Kit been a good kit. I just can’t find a link or something similar to that. Any link posted would be Appreciate it

 

[LucasAK]

I had trouble finding the KKM kit or just the adapter so I went with this one from Ebay. You could even just use the cone filter adapter for the MAF if you wanted.

https://rover.ebay.com/rover/1/711-...0001&campid=5574912417&icep_item=191919203371

 

[YoungMoney_Twitch]

I had trouble finding the KKM kit or just the adapter so I went with this one from Ebay. You could even just use the cone filter adapter for the MAF if you wanted.

BLACK BLUE AIR INTAKE KIT FIT1991-1994 FORD EXPLORER RANGER 4.0 4.0L OHV | eBay

Does your hood have enough clearance? I seen this on amazon but couldn’t ship to Cali

 

[LucasAK]

Does your hood have enough clearance? I seen this on amazon but couldn’t ship to Cali

I haven't noticed any clearance issues. Something I just noticed was the intake was rubbing on the alternator pulley. The "bracket" it comes with is a joke. I added some zip ties to keep it off the pulley and keep clearance from the positive terminal on my battery. I'm pretending I'll make something more permanent than zip ties later.

 

[YoungMoney_Twitch]

It’s possible if I just put the cone adapter in replace of the box right?

 

[LucasAK]

It’s possible if I just put the cone adapter in replace of the box right?

Yeah that should work fine.

 

[Travisfab]

Honestly not a good mod. The oem setup is much better with a high flow filter.

 

[YoungMoney_Twitch]

I actually got a maf adapter coming in next week see how I like it

 

[Jason94sport]

Watch how you mount the filter bracket. If your using the stock tube, you need to watch the clearance at the alt pulley. The tube may shift around & the pulley will slice into the bottom of the intake tube. That will mess up your day since it's after the MAS. The stock tube is a PITA to obtain a replacement.